top of page
102CDFL-3.jpg

102 CD FL Heidelberg-SOLD

An ergonomic control console for fast, easy and safe operation of the printing press using the latest technological and ergonomic innovations, consisting of:
 

1. Prinect Print Center Console:

  • Modern touch screen with high-quality TFT (Thin Film Transistor) technology

  • Adjustable height and inclination

  • Ink zone display with separate coarse and fine diode display of the ink profile

  • Additional control panels with touch-sensitive buttons and press information display at the feeder and the delivery.

 

2.Prinect PrintCenter software:

  • Remote control of the circumferential, lateral, and diagonal register and of the ink fountain roller.

  • Presetting of all important press functions, Automatic program flows, e.g. for wash-up procedures or ink shutoff

  • Country-specific support in 26 languages

  • Faster inking unit reaction with ‘Colour Booster’

  • Intelligent pre and post-dampening

  • Online operating manual and online spare parts catalog, Online help center with text information boxes

  • Job preparation for presenting a job before or during printing

 

3.Feeding:

  • Preset tape feeder with sheet smoother, automatic sheet size adjustment in the feeder and the delivery.

  • Automatic, contactless lateral pile alignment by means of an ultrasonic sensor

  • Pile lifting adjusted to stock thickness

  • Heidelberg comfort suction head with Motor-driven adjustment of the suction head height and Speed compensated blast air

  • Automatic misalignment correction by means of a motor driven adjustment of the forwarding suckers, controlled by the Prinect PrintCenter

  • Control panel with touch sensitive buttons and press information display.

  • 2 feeder pile boards, 1 set of hold down rods and circular brushes, 1 set of suckers and air blast nozzles for porous papers

 

4.Printing Unit:

  • New design of the DRUPA 2004 generation with modified guards

  • Chromium plated plate cylinders, Heidelberg AutoPlate System

  • Remote control of the circumferential, lateral,, and diagonal register

  • Automatic follow up of the 1st and 4th inking form roller and of the dampening form roller in case of a diagonal register correction

  • Coarse adjustment of the circumferential register (360 degree)

  • Printing nip blowing device at the sheet infeed between blanket cylinder and impression cylinder

  • Triple diameter transfer drum between the printing units

  • Pneumatic impression control mechanised

  • Sheet travel sensor for monitoring the sheet transport through the press

Technical Specification

Machine Speed- 15,000 sheets / hour

Weight- 39000 Kg.

Year of Manufacturing- 2008

Maximum Sheet size- 720 x 1,020 mm

Minimum Sheet size- 340 x 480 mm 

Coating Area- Coating Area not Required

Thickness- 500 gsm - 800gsm

Automatic- Yes

Model- CD 102-5 + L Basic

Country of Origin- Germany

Four (4) KOMORI original web offset printing units are supplied with the following features.

 

Construction

  • Unique cast rigid iron base construction with box frame design on the drive side for anti-vibration.

  • Using special quality bearings on all cylinders makes shock vibration reduced and smoothly cylinder-throwing on and off.

  • Solid plate and blanket cylinder with hard chrome plating.

  • Bearers of high-quality hardened steel are shrunk onto the cylinder body.

  • Individual cooled oil lubrication to all cylinder bearings with automatic greasing where applicable.

  • Eight (8) motorized register adjustments consisting of lateral (+/-3.0mm) and circumferential (+/-3.0mm) with automatic compensation of plate roller setting. The nip pressure is constantly kept in same, even if the register is moved.

  • Unit clutch with torque limiter to prevent machine damage.

  • Electromagnetic de-clutching of drive and inking clutch by a pneumatic cylinder.

 

Inking units

  • Large capacity ink duct with steel ink fountain roller.

  • Individual ink duct keys controlled by PQC system

  • The inking unit is comprised of large diameter rollers both upper and lower. Three large rubber-covered form rollers of different diameters.

  • Three copper oscillation rollers are cooled in each inker by means of water circulation.

  • The ink fountain roller kickback system is supplied to the upper and lower inking unit. The ink fountain roller is reversed sometime in rotations to take out the hickey between the ink keys and the fountain roller.

  • Ink oscillation form roller is fitted on the 1st form roller.

  • The ink roller wash-up blade and tray are remotely controlled.

Equipment

  1. Prinect Print Center Console

  2. Prinect PrintCenter software

  3. Feeding

  4. Printing Unit

  5. Inking Unit

  6. Dampening system

  7. Coating System

  8. Delivery

  9. Miscellaneous:

  • Central, modular air supply cabinet AirStar for all blast and suction air units

  • Pneumatic compressor for CD 102-2

  • ScrollStar, air compressor (Atlas Copco) as of CD 102-2+L Basic/-3 Basic

  • Additional separate air supply of the sheet guide plates via radial fan with continuously adjusted speed (integrated in the ScrollStar cabinet)

  • Brushless sinusoidal main drive, computer controlled

  • Central lubrication of the press and the gripper bar chains of the delivery with automatic lubrication interval

  • The completely redesigned safety devices of the DRUPA 2004 generation fulfill the current and future safety standards of the trade association (GS mark) and the European Union (CE mark)

  • Hickey catcher

  • Positioning foil

  • Set of tools

  • Interface adapter for connecting external device

To Know More

I'm always looking for new and exciting opportunities. Let's connect.

Email: pramod@tanishqenterprises.co.in

bottom of page